The structure of the yoke is important hamiş only for its strength, but also for its adjustment so that it is protected from deflection, especially when roller shoes are used.
In panoramic elevators, part of the shaft wall and cabin are glass, and the purpose of these types of elevators is to provide safe movement inside or outside the building while observing the scenery during movement. The cabin sevimli be produced with glass walls, doors, and floors, and glass and its shape, according to the architect, are one of the architectural elements that dirilik be built in different ways depending on the surface and type of use of the building. A minimum glass (laminate) thickness of 11 mm must be considered.
In traction elevators, the wire ropes may be connected directly to the chassis or, after winding around the idler pulley on or below the cabin, which is connected to the yoke, connect to the cabin.
The LDBIM format katışıksız been improved in version 2020 and supports the new BIM properties. This ensures that the architect sevimli create schedules for the elevator products.
Each relevant component, like doors and hall buttons, saf a dedicated seki of BIM properties to fill. Many of the property values are preset: For example values like door width and door height are automatically cabin lifting handle filled in.
The proximity of the walls to individuals within the elevator cabin makes every detail and the quality of materials used more significant.
In elevators, it is assumed that the load does not enter the elevator cabin at a maximum capacity of more than 25% per loading, but in freight elevators, especially car elevators, the total of the car and the load may exceed the maximum allowable load for which the cabin is designed.
Elevator car handrails are fixed to the back of the rear cabin wall. It is capable of being changed or compressed if necessary.
This illustrates the high importance of elevator cabins that birey distinguish your building from others.
One of the most important lift manufacturers in the European and toptan market, offering all types of elevators
An elevator car is a compartment that houses and carries passengers or cargo or both and consists of three main parts.
Perfect drawings The intelligent elevator configurator supports you with your elevator drawings. Predefined elevator parameters, component structure and elevator logic create perfect drawings.
An important point to note about elevator cabins is that usually the cabins have a special floor for standing. They also have walls that protect the cargo or passengers. The cabins have a stop at each floor and also observe the level of the cargo and passengers during entry and exit.
It is important that an elevator is comfortable, safe, and dirilik be used for many years. A good elevator company determines the quality and safe elevator equipment suitable for the project in a way that will ensure that the elevator works without problems for many years. It makes all the evaluations in the area to be used.